Cubby Organizer made from drawers

I would love for you to follow me on Pinterest and Instagram!!

I can't believe it is Thanksgiving time already!!  Say what?!  I am excited to relax and spend time with family, count my blessings, and eat yummy food!

This week I am so excited to share my Cubby Organizer made from Drawers...
Don't throw out your old drawers!  Repurpose them into a cute cubby organizer with this easy tutorial at MyLove2Create
Yep, these drawers were not fulfilling their true purpose in life, but now...they are looking pretty dang awesome!

I shared this project as one of my contributor posts over at My Repurposed Life last February, and I am so excited to show you how to build it here!
Cubby organizer made from drawers, MyLove2Create
I have always been obsessed with those cute cubby organizers you see in Hobby Lobby, they come in fun colors or rustic wood/metal, with cute labels.  You know what I am talking about?!

Every time I go there I stop and just stare at them, because I love them so much, I don't know why, but I do.
Poster board labels
I am happy to report that I finally bit the bullet and made my own...complete with cute labels!! Woot!

Wait, I am jumping ahead...lets start at the beginning.
old drawers
These two drawers were the only survivors from a free 4 drawer dresser that finally died at my house.  They were in decent shape, I just needed to add some glue and a few nails to make them sturdy.
testing out how to use the drawers to make a cubby organizer
To see if my cubby organizer idea would work I placed them on top of each other...and I knew it was going to be perfect.
cutting dividers pieces
This post contains Affiliate Links- Learn more!

I found a fence board and some mdf from my scrap pile, both were 1/2'' thick and 5 1/2'' wide, which was just the right size, love it when that happens. :)  I measured my drawers and figured out that I wanted 6 cubbies in each drawer, which would equal 12 total.

I cut two shelf boards, one for each drawer (from the fence board) and 8 cubby dividers (from the mdf), see the photo on the right.
attaching cubby dividers
After everything was sanded I quickly escaped the freezing cold to my warm kitchen. :)  I started adding the cubbies in the first drawer.  After measuring and marking on the drawer where to place everything I glued and nailed on the bottom dividers and the shelf board with my handy Ryobi Nail Gun.
attaching cubby dividers
I nailed one nail in from the top into each bottom divider (top left) and then pounded in my top dividers (top right).  Next, I nailed them in from the top (bottom left) and used a ruler as a guide.  I measured and marked on the back of the drawer where all the dividers were, and nailed them from there as well.  Those dividers are not going anywhere!  I did this with both drawers.
building a cubby organizer out of old drawers
When I added the dividers to my second drawer, I clamped it to the first drawer to use as a reference to make sure the dividers would be lined up perfectly (left) then I glued and nailed them in.  You can see on the two right photos that I am toenailing the dividers into the shelf boards, this is basically driving the nail in at an angle, because the nail gun can not fit into the cubbies.
putting two drawers together
After I had both drawers filled with the dividers, I added glue the the bottom drawer and attached the backs of each drawer together.  Then I clamped it up while the glue dried.
adding front trim
I used my Kreg Rip-Cut and Ryobi Circular Saw to cut strips from mdf, I cut 4 into 1'' strips.  These would be my front "trim" or ledges, and a perfect place for me to place my labels, because I had to have cute labels!  I simply glued and nailed them onto the bottom of each cubby section.
priming cubby organizer
It is already looking cute!   I primed it with some left over primer I had, and it went on perfectly...
don't spray paint in below freezing temperatures
My second spray paint attempt had a little more trouble.  I tried to re-coat several times and eventually gave up.  This is what happens when you spray paint in below freezing conditions, at least that is my theory.

I ended up using a very similar color of craft paint to doctor it up and was pleased with the result.  I like it looking a little rustic anyway, which is what I got.
adding reclaimed wood scrap wood paper to back of cubbies
I wasn't pleased with the back, however, and so I found some reclaimed wood craft paper that I liked and used it as a back drop in each cubby, I got it in this Beach House Paper Pack.

I had to do some patch jobs with it, but you can't even tell!  It was easy to cut to size and spray adhesive it so it could stick to the back of each cubby.  You can see in this photo I have already doctored up the poor spray paint job.
spray painting poster board faux metal labels
I made a special trip to two different craft stores to by my fun metal labels, and guess what they didn't have enough, I needed 12, AND they were TOO expensive.  

After wasting a couple of hours driving around and coming up empty, I decided to make my own labels.  I have been cutting poster board for another project on my Cricut, and decided that I could cut labels out of it too, since I had lots of extra scrap pieces.

I designed the labels and then cut them out with my Cricut Explore.  Then I spray painted them with a coat of metallic silver (probably not necessary) and finished them off with Oil rubbed bronze.
attaching poster board labels with real screws
I has some small screws that were the wrong color, so after pre drilling holes and attaching my labels I sprayed a squirt of oil rubbed bronze on my scrap board and then used a cheap water color brush to paint the screws to match.  The screws totally make them look legit. :)
number labels
For the inside, I used the middle section of the original label and had my circuit draw and cut for me, then I just popped them into each label.  I would recommend you spray adhesive them so they don't pop out, but mine have stayed pretty well, unless the kids mess with them.

I totally got the look I wanted and my labels were free!!!  Yippee!
Cubby organizer made from drawers, MyLove2Create
The reclaimed wood paper was perfect for the back, it adds just the right character!  I am so glad I had just enough to fit!
Cubby organizer made from drawers, MyLove2Create
This kind of organizer can go in any space and with any type of decor.  Plus it is super useful, you could hold craft supplies...
Cubby organizer made from drawers, MyLove2Create
Or hang it on the bathroom wall!
Cubby organizer made from drawers, MyLove2Create
It could hold gaming guys for your kids, or collectible figurines!  
Cubby organizer made from drawers, MyLove2Create
Who knew two ugly old drawers could be so cute!?
Cubby organizer made from drawers, MyLove2Create
What would you use it for?  Now don't you want to make your own!!  DO IT!!  And the share a photo with me, cause I would LOVE to see!!

Hugs,
Mindi

I will be linking to these partiesSavvy Southern Style, and Bloom Designs

Share:

3 comments

  1. What great vision you had! Great upcycled project, love it.

    ReplyDelete
  2. Umm... Genius! Love, love this idea. Thanks!

    ReplyDelete
  3. OMG PERFECT! I have two drawers right now that I've been trying to think what I could make with them. Thanks!

    ReplyDelete

Your comments make me smile! I love to hear what you think!